1. Corrosion resistance: immersed in 0.5ml/L hydrochloric acid for a long time to maintain the passive potential and no corrosion.Simulation GB4334.1 (2, 3, 4, 5, 6, 7, 8) -84, gb4334.5-90, gb5776-86, gbl0124-88, gbl0125-88, and 10% FeCl3 solution currently accelerate the corrosion of raw stainless steel and colored stainless steel plates.As a result, the corrosion resistance of stainless steel is much higher than that of the same raw material.
2. Heat resistance: soak in boiling water for 28 days;Exposure at 200°C for 5 weeks: long-term exposure below 250°C: heated to 400°C, film color does not change significantly.
3. Abrasion resistance and scratch resistance: it can withstand the pressure of 500g/cm2, the friction of rubber shall not exceed 20000 times, and 300g steel needle shall not be scratched.4. Processing performance: it can withstand conventional molding, deep drawing, bending and hardening. After 180°C bending test and 8mm cupping test, the oxide film is intact.
4. Scrubbing resistance: if there is dirt on the surface of the product, it can be cleaned with any organic solvent, neutral and water.
5. Anti-fouling: after the surface is stained, it can be restored after cleaning.
6. Finish: up to 8k mirror finish.
7. Welding performance: it can be used for various kinds of welding, such as arc welding and spot welding.
8 anti-aging performance: in the sun, the atmosphere, long time exposure to rain without aging.No matter it is placed in the chemical atmosphere of the factory, kitchen smoke atmosphere, or the humid air in the mountain area, the seaside Marine climate, its anti-aging performance is better than ordinary stainless steel.This property is also much better than that of organic coated steel plates.
For more color stainless steel plate information please visit: https://www.meibaotai.com
Post time: Nov-09-2019