Stainless steel line is one of the materials that often can be used in domestic decorating, the adornment that USES as setting wall or be used at receiving processing.Now meibaotai steel will tell you how to install the stainless steel line.
1, the first should be ready to decorate the stainless steel strip, choose a good line, make sure that the surface no scratches and touch prints and size is right.
2. Check whether the base surface of the seam is fixed firmly, and deal with the uneven situation of the seam.
3, a variety of decorative line of its own mouth position, should be away from the person’s line of vision, or placed in the indoor inconspicuous position.Especially the interface is more obvious than the metal decorative line, more attention should be paid to the decorative line of the corresponding position arrangement.
4, the first round nail in the position of the mouth fixed a wood liner, wood liner width, thickness is slightly smaller than the size of the inner diameter of stainless steel.
5. Coat the wood liner with epoxy resin adhesive (universal adhesive), coat the stainless steel groove with epoxy resin, and then clip the line onto the wood liner.
6, stainless steel line groove surface is generally covered with a layer of plastic tape protective layer, the plastic tape should be in the decorative finish construction after the stainless steel line groove torn off.If there is no protective layer of plastic tape on the surface of the line groove, it shall be affixed with one layer before construction so as not to damage the line surface during construction.
Post time: Mar-29-2019