1. Before handling and installation, do not tear off the protective film, scratch or scratch the surface, so as to avoid damaging the board without fingerprints or oil film surface, leading to oxidation and discoloration of the board color.
2. In the process of transportation, loading and unloading, installation and use, if there is any damaged surface (stainless steel plate without fingerprints), please immediately use transparent self-drying paint spraying.
3. Shield stainless steel without fingerprint plate during construction to prevent stainless steel from being scratched or corroded by corrosive liquid.
No-finger print Stainless steel plate handling and installation
4. Try not to use oxygen welding, argon arc welding and other high-temperature tools for direct welding.If you must weld, the area around the weld will fade.Spot welding is recommended.After welding, apply paint of similar color.
5. If the installation began to find rust stains that the use of materials is not good, timely with the business to put forward the problem, to avoid the later discovery of stainless steel rust this embarrassing situation, this will only be the user into no way.
6. After installation, check whether there are any stitched areas and if the color fades, call the merchant for complementary color.
7. After the completion of construction, the residual film should be removed as soon as possible to avoid degumming.Seal after installation.After tearing off the film, it is not allowed to use toluene, acetone, alcohol, tianshui, diluent and other chemicals to avoid, so as not to cause discolouration, oxidation, discolouration and other serious consequences.It is suggested that after the completion of the project, the treatment parts should be re-sprayed with transparent self-drying paint to prevent its occurrence.
For more information about No-finger print stainless steel plates, please visit: https://www.meibaotai.com
Post time: Sep-12-2019