1, the installation of the dragon skeleton: grassroots dragon skeleton installation, the installation process can refer to the construction process of wood keel or light steel keel, check the verticality and flatness;
2, fixed bottom plate: the bottom plate is generally used 5-12mm thick plywood, construction method and requirements and ordinary wood cover panel construction is the same, but when the keel is light steel keel or Angle steel keel, to drill holes in the keel, the use of self-tapping screws will be fixed on the bottom plate, and the screw head can not be higher than the surface of the bottom plate;
3. Fixed panel: color stainless steel decorative plate shall be made into finished product modeling according to design size and modeling requirements before installation.When there is a bottom plate, respectively in the bottom plate and stainless steel back coated with universal adhesive, will be prepared to process the stainless steel plate gently paste on the bottom plate;When there is no bottom plate, the pre-processed stainless steel plate is fixed on the light steel keel with stainless steel screws or directly welded on the keel;
4, edge folding: edge folding treatment, between the stainless steel joint or Yin Angle, Yang Angle is filled with sealant, pressure stainless steel groove and other methods of edge folding, decorative treatment.
5, use a soft dry cloth to clean the surface of the color stainless steel and tear off the protective film.
Key words: embossed stainless steel sheet
Post time: Mar-07-2019